Back to Blog
How-to Guides 2026-11-22 Camera Clix 0 views

Rode Micro BoomPole Pro Setup for Field Recording

Rode Micro BoomPole Pro Setup for Field Recording

Learn how to set up and use the Rode Micro BoomPole Pro for field recording, including assembly, microphone attachment, and placement tips for clear audio.

What Makes the Micro BoomPole Pro Different

The Rode Micro BoomPole Pro is a modular boompole designed for location sound engineers who need to capture audio in tight or awkward spaces. Unlike a standard single-section pole, it breaks down into three sections that can be used together or separately, giving you flexibility in how you position the microphone.

Its compact form factor and compatibility with the VideoMicro microphone make it a practical choice for run-and-gun documentary work, interview setups, and small-crew field recording where a full-size boom is impractical.

Assembling the Micro BoomPole Pro

The Micro BoomPole Pro ships as three sections that thread together using an industry-standard 3/8" thread. Assembly is straightforward and requires no tools.

  1. 1. Identify the three sections: Each section is a separate tube with male and female threaded ends. Lay them out so you can see which end connects to the next.
  2. 2. Attach the first two sections: Screw the male thread of one section into the female thread of another. Hand-tighten until snug — do not overtighten.
  3. 3. Add the third section: Attach the remaining section in the same way. When all three are connected, the pole reaches a maximum length of 2.2 meters (7'2").
  4. 4. Extend beyond 2.2m (optional): The sections can also be used as extensions to the standard Boompole Pro, allowing the assembled pole to reach over 3.7 meters (12'). This is useful when you need extra reach but still want the modular convenience.

Microphone Compatibility and Attachment

  • Rode Micro BoomPole Pro: The Micro Boompole Pro is optimised for use with the VideoMicro microphone. This means the pole's weight, balance, and thread size are designed to work naturally with that specific microphone, making setup quick and stable.
    Rode Micro BoomPole Pro
    Rode Micro BoomPole Pro
  • Rode Micro BoomPole Pro: The pole uses an industry standard 3/8" thread for all connections. You can attach most shotgun microphones with a compatible shock mount or adapter, not just the VideoMicro. Check your microphone's thread size — if it's 5/8", you'll need a simple adapter.

Positioning the Microphone for Field Recording

Once assembled and attached to your microphone, the Micro BoomPole Pro gives you several placement options. For interviews, hold the pole overhead and point the microphone downward toward the subject's mouth, adjusting the distance based on ambient noise and the microphone's pickup pattern as described in the product instructions.

In confined spaces like a car interior or a crowded event, you can use fewer sections to keep the pole short and maneuverable. The modular design lets you remove one or two sections to reduce length without losing the ability to boom from above.

For outdoor recording, be mindful of wind. The pole itself doesn't include a windscreen, so use a compatible furry windshield or blimp on your microphone if conditions are breezy.

What the Catalog Doesn't Specify

The supplied information does not include a specific maximum weight capacity for the Micro BoomPole Pro, nor does it provide detailed care or storage instructions. For heavy microphones or long-duration use, test the balance before recording. Store the sections in a padded case to protect the threads and finish.

Related Articles

Customer Service
Home
Products
Cart
Profile