Back to Blog
How-to Guides 2026-11-20 Camera Clix 0 views

How to Attach a Flex Arm for Studio Lighting

How to Attach a Flex Arm for Studio Lighting

Learn how to attach a PM Flex Arm to your studio light or modifier, with practical tips for positioning and compatibility using standard threaded hardware.

What the PM Flex Arm Connects To

The PM Flex Arm - Standard is a 22-inch flexible arm built to bridge standard threaded hardware. One end has a 1/4-20 male spigot (brass), and the other has a 3/8-inch female stud (brass). This means you can attach a light or modifier to one end and a stand or bracket to the other, using threads that are common in studio lighting.

Before you start, confirm that your light or modifier has a matching 1/4-20 female thread or a 3/8-inch male stud. Most speedlights, monolights, and softboxes use one of these standards. If your gear uses a different mount, you may need an adapter—the catalog does not list adapters, so check your equipment's manual.

Attaching the Flex Arm Step by Step

  1. Identify the ends: The 1/4-20 male spigot is the threaded stud that screws into a female 1/4-20 receiver. The 3/8-inch female stud is the threaded hole that accepts a 3/8-inch male stud. Brass construction resists corrosion.
  2. Attach to your light stand or bracket: Screw the 3/8-inch female stud onto a 3/8-inch male stud on your stand or boom arm. Turn it clockwise until snug. Do not overtighten—brass threads can strip if forced.
  3. Attach your light or modifier to the arm: Screw the 1/4-20 male spigot into the 1/4-20 female thread on your light fixture, bracket, or modifier. Again, hand-tighten only.
  4. Position the arm: Bend the 22-inch flexible arm to aim the light where you need it. The arm holds its shape, so you can adjust without retightening. Test the balance: if the arm droops, the load may be too heavy.

Using the Flex Arm with a MagMod MagBounce 2

MagMod MagBounce 2
MagMod MagBounce 2

The MagMod MagBounce 2 is a silicone rubber diffuser that attaches magnetically to MagMod flash modifier system components. It provides soft, diffused light and rotates for portrait or landscape orientation. While the MagBounce 2 itself uses magnetic attachment (not threaded), you can mount it on a speedlight that is attached to the flex arm via a compatible bracket or cold shoe.

For example, if your speedlight has a 1/4-20 thread on its bracket, you can screw the flex arm's 1/4-20 male spigot into that thread. Then attach the MagBounce 2 to the speedlight's MagMod-compatible head. The flex arm lets you position the speedlight off-camera while the MagBounce 2 softens the light. The catalog does not confirm the weight limit of the flex arm, so use common sense with heavier modifiers.

Flex Arm Specs at a Glance

  • PM Flex Arm - Standard: 22-inch length for adjustable positioning The 22-inch reach gives you room to place the light away from the stand, useful for rim lighting or close-up work.
    PM Flex Arm - Standard
    PM Flex Arm - Standard
  • PM Flex Arm - Standard: 1/4-20 male spigot (brass) at one end; 3/8-inch female stud (brass) at the other end These are the two most common thread standards in studio lighting, making the arm widely compatible with lights, brackets, and stands.
  • PM Flex Arm - Standard: Brass construction for durability and corrosion resistance Brass holds up well in studio environments and resists rust, so the threads stay smooth over time.

What the Catalog Does Not Settle

The supplied records do not include a maximum load weight for the PM Flex Arm. If your modifier or light is heavy (e.g., a large softbox), the arm may not hold its position. Use the arm with lightweight fixtures such as speedlights, small LEDs, or reflectors. The catalog also does not confirm compatibility with non-standard mounts like Bowens or Profoto—check your gear's thread type before buying.

No operating instructions are supplied for the MagMod MagBounce 2 beyond its magnetic attachment and rotatable design. For cleaning or storage, refer to the product's own documentation.

Related Articles

Customer Service
Home
Products
Cart
Profile